EHC-09 Wave ultrasonic thickness gage
With LiVE COLOR A-Scan
UPG-09 sê ri là dòng thiết bị siêu âm đo chiều dày kỹ thuật số, kiểu cầm tay, được thiết kế cho các ứng dụng đo chiều dày và đánh giá mức độ ăn mòn của các kết cấu thép: đường ống nồi hơi, bồn áp lực, vỏ tàu…
- Thiết bị siêu âm đo chiều dày nhỏ nhất và có hiển thị biểu diễn dạng sóng A-scan màu duy nhất trên thế giới
- Dải đo: 0.2 – 508 mm
- Quét B-scan đánh giá ăn mòn
- Chế độ đo Echo –to-Echo cho phép bỏ qua lớp phủ
- Lưu đến 50,000 giá trị đo
- Kết nối với máy tính
- Bảo hành 2 năm
EHC-09B
EHC-09B là model cơ bản, giá rẻ, được thiết kế chắc chắn, đo chính xác chiều dày với hầu hết các kết cấu thép mà chỉ cần tiếp cận từ một phía của đối tượng cần đo. Thiết bị được bảo vệ trong một lớp vỏ bảo vệ bằng plastic chắc chắn với bàn phím cao su giống như các model khác, thiết bị mang đến một giao diện thân thiện, có thể được sử dụng với hầu hết các đầu dò cho sê ri EHC-09. Bộ bộ lưu dữ liệu dung lượng lớn và các đặc tính khác của EHC-09 hay EHC-09DL có thể được cập nhật mà không phải gửi máy về Nhà sản xuất.
EHC-09
EHC-09 là model kế tiếp bao gồm hầu hết các đặc tính của một thiết bị đo chiều dày không yêu cầu có bộ ghi dữ liệu. Với model EHC-09, người sử dụng có thể tăng hoặc giảm mức khuếch đại, mức rung và mức rọi sáng của bàn phím trong các điều kiện của chế độ cảnh báo và biết được tình trạng lắp đầu dò nhờ thông báo trên màn hình. Việc nâng cấp thiết bị thêm một số tính năng nâng cao như chế độ đo “xung dội tới xung dội”, quét hiển thị hình chiếu cạnh (B-scan) cho kiểm tra đánh giá ăn mòn và bộ lưu dữ liệu dung lượng lớn ( đến 50,000 giá trị chiều dày) được thực hiện một cách đơn giản và không phải gửi máy tới Nhà sản xuất.
EHC-09DL
EHC-09DL là model cao nhất trong dòng thiết bị này, bao gồm tất cả các tính năng của EHC-09 nhưng có thêm bộ lưu dữ liệu dung lượng lớn và chế độ đo “xung dội tới xung dội” (Echo to Echo).
Dowloads:
TYPICAL APPLICATIONS:
-
Boiler Tubes
-
Pressure Vessels
-
Storage Tanks
-
Ship Hulls
-
Containers
-
Home Oil Tanks
-
Pipes
-
Steam lines
-
Compressors
-
Shafts
-
Bridge Pins
-
Bond Inspection
Our New EZ Scan is a small, magnetic wheel, high temperature linear encoder specifically designed for use with the Color WAVE gage. Download Brochure Here
The above image displays the information obtained when using the EZ Scan in B-Scan (cross sectional view) mode. This image shows a 3 step test block with 2 and part of a third flat bottom hole. Also note, the thickness in the top right of .577 inch at the spot where the triangle is located on the far left and DT for Distance Traveled (-9.350") indicating how far the encoder has moved. The B-Scans can be saved to the computer (up to 100K readings) to Microsoft Excel or the actual image of the B-Scan via our optional data xl pro. When combinded with the minimum depth alarm, the B-Scan can dynamically change from Green to Yellow to Red indicating a good, marginal or critical minimum thickness has been tripped.
Our newest feature includes the use of angle beam transducers and the display of anugular distance (soundpth, depth and surface distance to the measured echo accounting for proper leg calculations) The orange bar to the bottom left of the display is a mian bang blanking that can blank out un-wanted, suprious echoes or noise.
The new File Compare is available for V2.0 or higher.
Ideal for corrosion monitoring, the file compare feature displays instantaneous readings of the current thickness, previous thickness (old) and differential as either a percent (%) or absolute reading. The waveform above has an alarm on representing a wall loss of -0.001". The user can set the wall loss amount or even wall growth to monitor scale build up or a previous bad reading.
Typical screen shot
Close up of Gage with Blue Waveform and White Background
Echoes shown in Green, user can select multiple color palettes for A-Scan, Thickness, Background and Alarms.
Echoes shown in Green (Outline Mode like an Oscilloscope) with Red Baseline Main Bang echo blanking and second red, Interface Blanking. Allows operator to adjust range, gain and blanking for difficult applications and echo verification. Blanking adjustments create dead zones so unwanted echoes such as noise or mode converted echoes will not be detected.
Large Thickness displayed with waveform shut off
Color Coded B-Scan, a cross sectional representation of a 5 step test block with colors corresponding to alarm, red to left exceed high alarm, yellow are caution as readings are getting close to a high and/or low alarm and green represents a good reading. Cursor (white line on right of screen) can be used to scroll left and right to display thickness value. B-Scan is standard on EHC-09DL CW.
Standard RF, Full Wave Rectification, Halt +, Half -, RF is ideal for bond inspection applications
Available in Color(WAVE) and Monochrome
- 06/11/2009 00:31 - Thiết bị đo chiều dày chai thủy tinh, nhựa
- 19/07/2009 11:34 - Bộ Kit scanner kiểm tra ăn mòn
- 18/07/2009 20:58 - Thiết bị đo chiều dày UPG-07 Seri